Posts tagged as:

Rotary Cutters

How to Choose Quaint Bathroom Accessories

by Bath Towel on September 11, 2009

Image a room filled with berry red walls with com­pli­ments of motif poppy and styl­ish slip­cov­ers to off­set your quaint bath­room. Throw in a few lay­ered fab­rics, such as cur­tains for your shower to enhance the room. Flo­ral shower cur­tains are idea for quaint baths designed in berry red wall designs.

How to choose bath­room acces­sories:
Choos­ing bath­room acces­sories is easy if you have your design laid out. Arti­sans often rec­om­mend that you make up a blue print before re-designing the bath even if you are adding bath­room acces­sories. You want to scope out the area first to con­sider what acces­sories would look best in your area.

For quaint baths, you want to keep in mind that you are choos­ing bath­room acces­sories for old-fashioned or pic­turesque rooms. Of course, you want to choose charm­ing items, yet you want to keep it on the tra­di­tional level. Some­times tra­di­tional rooms require a twist of odd and pecu­liar items that make it appeal­ing to the eye. When design­ing quaint envi­ron­ments, why not con­sider braided rugs?

How do I choose mate­ri­als?
You will need fleece from sweat­shirts to cre­ate your braid. Choose a vari­ety of col­ors, unless you pre­fer plain. You will also need a sew­ers mat and a pair of rotary cut­ters, as well as thread designed to hold up to heavy mate­r­ial. In addi­tion, you will need Braid­kin, or sim­i­lar lacers.

How do I choose the nee­dle?
You should con­sider the large-eye nee­dles, such as the craft nee­dles with round and blunted ends. You will need com­mon craft thread and nee­dles as well.

Do I need any­thing else to fin­ish the rug?
Sure, you will need clamps to hold your fab­ric in place. In addi­tion, you will need clothes­pins, which you can use to secure the ends of your braided rug while adding lace. The last item you will need is a non-slip mat/pad. You want to slip the pad beneath the rug once you are finished.

About Author: David Hue­ber is an online expert in build­ing indus­try. He also offers top qual­ity tips like: House Paint­ing, Inte­rior paint­ing, Exte­rior Paint & House Painters etc.

{ 0 comments }

How to Bind and Scallop Bath Accessories and Towels

by Bath Towel on September 4, 2009

Now that you have designed your Terry-towels, i.e. hand-sew them, you may want to add binds and scal­lop. Before we get started you will need to pur­chase an unadorned Terry towel, or towel of choice. Prefer­ably, you want to select wash­able cloth, as well as medium-weight mate­r­ial. Con­sider taffeta, satin, or polyester.

How to cre­ate binds and scal­lop:
Once you have your mate­ri­als gath­ered, (1) use tis­sue paper to cre­ate the edge of your scal­lop. When you draw the edge of the scal­lop, add an odd fig­ure in the pat­tern, espe­cially odd enough to cre­ate a curve. Cre­ate a 1 inch depth, start­ing at the lower point and work toward the high point. Now with your tis­sue in hand, fas­ten it to the towel, using craft pins. Next, use rotary cut­ters, or sewing scis­sors to trim the edges of your scallop. 

(2) Use your rotary cut­ters and/or scis­sors to carve the strip of hems and start piec­ing the strips, join­ing it so that it cre­ates your strip bind. Length­ways, press your strip until it folds in half and on the left side. Avoid mis­lead­ing the width of your strip.

(3) Next, on the right side of your fab­ric, pin the strip bind. (4) Scant darn quar­ter inch start­ing at the raw edges. (5) In the direc­tion of the lower bor­der or edge, press the nar­row piece. Over the fab­ric, fold the bind­ing ends over to the side of your cloth. Press and enfold your bind about the border/edges of your scal­lop and secure it with pins. Make sure that the pins insert into the trench of the seams. (6) At the trench, begin stitch­ing in the direc­tion of the right plane. On the left plane, baste, using the catch bind scheme.

You have com­pleted your scal­lop and bind­ing, which is the start of cre­at­ing your embell­ished and dec­o­ra­tive tow­els. Tow­els make great bath­room acces­sories, since the col­ors will aug­ment your envi­ron­ment. Now you are ready to add bands and lace trim to your towel.

About Author: David Hue­ber is an online expert in build­ing indus­try. He also offers top qual­ity tips like: House Paint­ing, Inte­rior paint­ing, Exte­rior Paint & House Painters etc.

{ 0 comments }

How to Bind and Scallop Bathroom Accessories and Towels

by Bath Towel on September 4, 2009

Now that you have designed your Terry-towels, i.e. hand-sew them, you may want to add binds and scal­lop. Before we get started you will need to pur­chase an unadorned Terry towel, or towel of choice. Prefer­ably, you want to select wash­able cloth, as well as medium-weight mate­r­ial. Con­sider taffeta, satin, or polyester.

How to cre­ate binds and scal­lop:
Once you have your mate­ri­als gath­ered, (1) use tis­sue paper to cre­ate the edge of your scal­lop. When you draw the edge of the scal­lop, add an odd fig­ure in the pat­tern, espe­cially odd enough to cre­ate a curve. Cre­ate a 1 inch depth, start­ing at the lower point and work toward the high point. Now with your tis­sue in hand, fas­ten it to the towel, using craft pins. Next, use rotary cut­ters, or sewing scis­sors to trim the edges of your scallop. 

(2) Use your rotary cut­ters and/or scis­sors to carve the strip of hems and start piec­ing the strips, join­ing it so that it cre­ates your strip bind. Length­ways, press your strip until it folds in half and on the left side. Avoid mis­lead­ing the width of your strip.

(3) Next, on the right side of your fab­ric, pin the strip bind. (4) Scant darn quar­ter inch start­ing at the raw edges. (5) In the direc­tion of the lower bor­der or edge, press the nar­row piece. Over the fab­ric, fold the bind­ing ends over to the side of your cloth. Press and enfold your bind about the border/edges of your scal­lop and secure it with pins. Make sure that the pins insert into the trench of the seams. (6) At the trench, begin stitch­ing in the direc­tion of the right plane. On the left plane, baste, using the catch bind scheme.

You have com­pleted your scal­lop and bind­ing, which is the start of cre­at­ing your embell­ished and dec­o­ra­tive tow­els. Tow­els make great bath­room acces­sories, since the col­ors will aug­ment your envi­ron­ment. Now you are ready to add bands and lace trim to your towel.

About Author: David Hue­ber is an online expert in build­ing indus­try. He also offers top qual­ity tips like: House Paint­ing, Inte­rior paint­ing, Exte­rior Paint & House Painters etc.

{ 0 comments }